Dealer Resources

We're Here To Support You.

Welcome to your Solyx dealer training resource page. This page is designed for professional window film installers who sell, specify, and install Solyx branded decorative window films. Use these resources to stay updated on new tools, product programs, sampling options, specification support, and dealer-focused training opportunities.

Dealer resources

01 Video GuideInstallationLatest Solyx Switchable™ Demonstration Install with Commentary VideoInstall refresherSupport form ExpandCollapse

Watch a complete Solyx Switchable install

Follow along as our team installs Solyx Switchable™ film from start to finish, with commentary on prep, handling, bus bar placement, wiring, and final testing. Use it as a refresher the day before or the day of an install.

02 WebinarFall 2026 Solyx Switchable™ Product Essentials & Selling Strategies VideoQ&A · 20 ExpandCollapse

Questions & Answers | Solyx Switchable Webinar

Answers to the questions dealers asked during the live webinar. Search, filter by topic, or open a question to read the answer.

Product & ManufacturingWhere is Solyx Switchable PDLC film manufactured, and where are you located?
The film is manufactured to order here in the United States. Decorative Films is located in Frederick, MD.
Product & ManufacturingIs it manufactured/housed in the US, and are all components sourced in the US?
The base product we build from is a PET product, known for how thin it is and for its clarity. Components are sourced from multiple places — we purchase from US suppliers, though a couple of items down the supply chain do come from overseas, like most products today. Because we fulfill these orders essentially in-house and close to home, our turnaround stays fast.
Product & ManufacturingIs Solyx Switchable film and transformer UL listed?
Yes, both are UL listed.
Pricing & QuotingWhat does Solyx Switchable film cost?
The film is sold by the square foot and includes our industry-leading 5-year extended warranty. Add-ons include the controllers and wire management system options, plus any special work such as cuts, notches, or out-of-square panels. The add-ons needed will vary depending on the scope of the project. We can provide same-day quoting and a full price list with all the options and components upon request. Please email info@decorativefilm.com for more details.
Pricing & QuotingIs it best to get a quote every time, or can we estimate ourselves? Who do we contact for pricing?
Once you know our process, it isn't necessary to request a quote every time — you can give your customer a rough number yourself. Many prices are fixed with little variation; you mainly need the accessory counts (e.g., how many controllers), and we can supply all of that. For quotes, email info@decorativefilm.com and we'll typically respond within the hour. If we need any clarification before a final quote, we'll get it answered quickly and send the quote right back.
InstallationIs there a required wait time when installing a decorative design and switchable film stacked together? Are any designs not compatible?
If you install the decorative pattern first on the glass, we recommend letting it fully cure and dry before applying the switchable on top — you don't want it wet, and you don't want it to lift if you later need to pull the switchable off. Alternatively, you can put the decorative pattern on the opposite side of the glass, in which case there's no issue doing both the same day at the same time. We have a piece installed in our showroom with one pattern beneath the switchable and another on the other side of the glass.
InstallationIs there a specific set of decorative designs that can go under the switchable, or can any of your designs be used?
If it's going immediately under the switchable, you want something without texture — super smooth, preferably a gloss finish for the best bond. Avoid anything matte, textured, or sandblasted.
InstallationWhat's the wait time between layers if the decorative layer and switchable are on the same side of the glass?
On the same side, let the decorative layer cure and fully dry before applying the switchable on top. If they're on opposite sides of the glass, timing doesn't matter.
InstallationDo the edges need to be sealed?
Edges don't have to be sealed, but they can be — it depends on the installation (doors, gaskets, open-edge glass, etc.). Use a natural (neutral) cure caulk so it doesn't interfere with the electrical components on the bus bar or the film edges. In humid or moist environments such as bathrooms (a very popular application), you'll definitely want to seal the edges.
InstallationCan Solyx Switchable film be trimmed on site?
It can, but you should avoid it at all costs. If needed, use a straight edge or shears that work well for it, with a sharp blade on a cutting table or hard surface. Only the sides without the bus bar should be altered.
InstallationCan it be installed on French-pane doors or windows with metal frames?
French-pane doors are tricky — not so much the install itself, but all the extra work. Unless the divider can be removed, each pane needs its own piece of film, bus bar, and set of wires, and all of those wires have to be routed (typically to the hinge side of the door and out to the controller) with wire management. It can get messy and cumbersome and may not look perfectly clean. It can be done — a simple three-pane door wasn't bad since it was just three wire runs — but larger sets of panes get difficult, especially working with small pieces.
Applications & EnvironmentCan it be exterior applied? Any issues with heat or direct sunlight?
You wouldn't apply it on the outside (exterior) surface, but it can be on exterior-facing glass. To help prevent faster deterioration in heavy sunlight, some installers add a clear solar film under the product or on the exterior. The film does have a UV block built in, but it can deteriorate if exposed to continuous south- or west-facing sun over a long period.
Applications & EnvironmentIs a shower door a recommended application?
Yes — it can be done on the outside of the glass, and you'll want to seal it well.
Applications & EnvironmentCan it be installed near a stovetop or sauna where there's extreme heat?
Keep the film no closer to a heat source than about 150 degrees, so avoid placing it too close to a stove or oven. For a sauna door, applying it on the outside of the door should be fine; you would not want it on the inside.
Care & DurabilityWhat should be used to clean Solyx Switchable film?
Use a microfiber towel and spray the cloth, not the film. For fingerprints or spots, use a non-ammonia glass cleaner (such as Windex or Glass Plus) and spot-clean only. Never soak it down and squeegee it off — that isn't necessary and can cause issues.
Care & DurabilityIf Solyx Switchable film gets a small nick, will it still function?
Some damage will prevent the product from going fully clear or fully frosted, so be careful of creases and bends. We recommend a multi-person install — you need someone squeezing and holding the product as you get started. If it gets a chip, nick, or other damage, it will affect how it works at that spot (not the entire panel, but the damaged area).
WarrantyIs there a type of caulking that would void the warranty?
Yes — use the correct product. Dow products work well: the Dow 995 (the same product used for safety film) gives you black or colored options, and the Dow 1199 is a clear option. In all cases, use a neutral-cure, non-acidic caulk so it doesn't interfere with the electrical components on the bus bar.
Power & ControlsDoes the switchable have to be plugged in or hardwired, or can it use a plug adapter?
It comes with a plug — the same style of cord and 3-prong plug as a computer monitor. You plug it into the back of the controller and then into an outlet. It does not need to be hardwired to a junction box; if there's an outlet near the window (or up in a drop ceiling in a commercial space), it can simply be plugged into an outlet.
Turnaround & ComparisonsWe install Quick Switch quite often — how does this compare?
While many PDLC film products on the market are similar, what sets us apart is our extended 5-year warranty, support, and turnaround time. We typically quote same day, and delivery to site is usually about 2–3 weeks (a couple of weeks at most). The fastest turnaround we've done is about a week, and when something comes up — a wrong measurement or damaged piece — we've been able to do a remake in under 48 hours. Note there's a short curing process after cutting a panel to let the copper strips set before handling, so allow a day or two there.
International / ShippingWith the current customs situation in Canada, can we do business, or will the per-square-foot cost increase significantly at the border?
We've had orders go internationally — we have customers in Canada and a dealer in Alaska selling a lot of these. For the specifics on shipping, duties, and Canadian border costs, email info@decorativefilm.com and our team can provide the codes you'd need. We're happy to price out a full project including shipping — send us the details and we'll put together a quote.
No matching questions. or email info@decorativefilm.com.
03 WebinarSpring 2026 Quarterly Pro Dealer Webinar Video6 topic highlights ExpandCollapse

Webinar topics include

Solyx Mini Site

Solyx Mini Site

Add our searchable Solyx Mini Site to your website and provide customers with a digital catalog featuring product information without pricing.

View Mini Site →
Design Studio

Design Studio

Explore our newly rebranded custom department, Design Studio by Decorative Films, now hosted on its own dedicated website.

Visit Design Studio →
Free Samples

Free Samples

Professional customers now receive complimentary sample shipping directly from the same site used to place film orders.

Order Samples →
BIM Library

BIM Library

Over 200 films are now available as Revit-ready BIM objects for 3D modeling, visualization, and specification support.

View BIM Library →
Switchable Film

Switchable Film

Interested in switchable privacy film solutions? Connect with Paul by completing our inquiry form for more information.

Contact Paul →
Solar Bird Safety Film

Solar Bird Safety

Learn more about our solar bird safety film and explore the Cylburn Arboretum case study and project details.

Read Case Study →